Configuration

Multimap: Switchable maps in the same ECU

Several calibration maps in the same ECU, selectable with an accelerator pedal sequence, with the ignition on and the engine off. Several configurations in a single file.

Order this operation

Create a free professional account and order it from your dashboard, or message us on WhatsApp with the ECU details.

Custom development — price on request

What is multimap?

The multimap is a software operation that stores several calibration maps in the same ECU, which the driver switches with an accelerator pedal sequence, without having to reflash the ECU every time a different configuration is wanted.

Typical use cases

  • Mixed-use vehicles: a map for daily use (stock or slightly optimized) and a more aggressive one for circuit, rally or events.
  • Fleets: different driving profiles depending on the driver or mission type (eco, standard, high performance).
  • Flex-fuel vehicles or variable fuel: a map by fuel type.
  • Demonstrations and tests on a dyno, where it is useful to compare configurations without reflashing.
  • Vehicles with legal restrictions depending on the area: an approved map and an off-road or competition map.

How to switch maps

With an accelerator pedal sequence, with the ignition on and the engine off. No buttons or wiring need to be installed: the switch is made from the pedal itself. With the file, we give the workshop the exact sequence so it can explain it to the customer.

Technical implementation

Depending on the ECU, the multimap is implemented by taking advantage of the manufacturer's native EOM (End Of Memory) infrastructure (typical in Bosch EDC17 with integrated variant system) or via a programmed switching routine in free areas of the flash. In each case, we prepare the complete file with the calibrated maps and integrated switching logic, ready to flash.

Professional notice: This operation is intended for workshops, professional remappers and electronics lab technicians. Its use on road vehicles, off-road vehicles, machinery, test benches or competition vehicles is the sole responsibility of the professional installer and the end user, under the laws applicable in each country.

Check your ECU

Send us your ECU reference and the vehicle, and we will confirm whether we have a proven solution.

Frequently asked questions

How many maps can be fitted with multimap?
Usually between 2 and 4 maps. It depends on the ECU and the space available in the flash. Bosch EDC17 and MED17 ECUs usually take up to 4 without any problem.
How do you switch between maps?
With an accelerator pedal sequence, with the ignition on and the engine off. No button or extra wiring is needed. With the file, we give you the exact sequence so you can explain it to the customer.
Does multimap affect the warranty or the roadworthiness inspection?
Multimap is a software operation. In practice it behaves like any other remap. How each map is used is the end user's responsibility.
Can multimap be combined with Stage 1 or Stage 2?
Yes. In fact it is one of the most common uses: a stock map, a Stage 1 map and a Stage 2 map in the same ECU, selectable from the accelerator pedal.
Which ECUs are compatible?
Most modern Bosch ECUs (EDC17, MED17, MD1, MG1) and many Continental/Siemens and Delphi ones. Send us your ECU reference and we will confirm whether we have a proven solution.

Do you need this operation for a customer's vehicle?

Register as a professional at EcuTracer and access our B2B platform: turnaround depending on the ECU, confirmed before we start, direct technical support via WhatsApp and a tailored quote.