In-house development · New · November 2026
Multimap on Continental PCR2.1: VAG 1.6 TDI with pedal selection
In-house multimap development for the Continental PCR2.1 in VAG 1.6 TDI common rail engines: two or three positions selected with the accelerator pedal, with no wiring and no extra hardware.
What we deliver
The PCR2.1 in the Volkswagen, Audi, Seat and Skoda 1.6 TDI common rail engines has no multimap solution in the commercial databases and is worked on without DAMOS. We have solved it with our own development, validated on the vehicle: the same ECU offers several calibrations and the driver chooses which one to use without touching anything on the car.
- Selection by pedal sequence, with the ignition on and the engine off. No wiring and no extra hardware.
- Active mode shown by blinks of the glow plug warning light: the driver knows which position is selected before starting the engine.
- Remembers the last mode: after a restart, the ECU stays in the chosen position.
- Two or three positions, depending on the free space in each software version.
Positions
- ORI: original calibration with the deletes and the common limiters requested by the workshop.
- Stage 1.
- Stage 2 tailored to the installed hardware, when the software version leaves room for a third position.
The tuner can ask us to adjust the calibration of each position, on request and on the read of that vehicle.
Locked to the VIN
Each file is locked to the VIN of the vehicle it is delivered for: cloned to another ECU, it does not work. That is why we always ask for the full read together with the VIN.
Requirements
- Full read of the PCR2.1.
- Vehicle VIN.
- Reading tool used.
- Details of the installed hardware, if the Stage 2 position is requested.
Status and price
First units delivered and validated on the vehicle. The development is done once per software version; each additional vehicle with that version is licensed separately, locked to its VIN. Price on request.
Professional notice: This service is aimed at workshops and professionals in the automotive sector. It is suitable for off-road applications, agricultural and industrial machinery, racing vehicles, repair of cloned or replaced ECUs, and cases of failure where the original hardware is no longer viable. The final application to the vehicle and its subsequent use are the sole responsibility of the professional installer and the end user, in accordance with the applicable legislation in each country.
Related ECU pages
Other developments
Cummins CM2620 — Speed limiter (VMAX)
ECU: Cummins CM2620Speed limiter modification on the Cummins CM2620 engine management, without DAMOS. In-house development, validated on the vehicle.View the development AvailableNew · November 2026Chevrolet Cruze 1.6 LDE — Mappack and Stage 1 (GM E83)
ECU: GM E83 (ACDelco)In-house mappack and Stage 1 for the naturally aspirated Chevrolet Cruze 1.6 (LDE engine) with GM E83 ECU, without DAMOS and with no solution in the…View the development AvailableNew · November 2026Fuso Canter 3.0 (Bosch MD1CS069) — Speed limiter (VMAX)
ECU: Bosch MD1CS069Speed limiter removal on the Bosch MD1CS069 in the 2026 Mitsubishi Fuso Canter 3.0, without DAMOS, on a very recent software. In-house development, verified and running…View the developmentGot an ECU with no commercial solution?
Send us the full read and the software reference. We will tell you whether we can develop it, and how long it will take, before we start.