Diagnostics and safety

Multi-map system: several maps in the same ECU

Multi-map system in the ECU: 2-4 maps in the same file, selectable with an accelerator pedal sequence, with the ignition on and the engine off.

Bosch EDC17 · MED17 · MD1 · MG1Simos · SIDDelphi · Marelli
Custom development — price on request

Turnaround depending on the ECU, confirmed before we start, and lifetime warranty.

What is a multi-map system?

The multi-map system allows the driver to switch between several engine calibration profiles without having to remap the ECU each time. The same vehicle can have an economy map for daily driving, a sport map for weekend trips and a specific map for towing or mountain driving.

Typical configurations

  • ECO Map: smooth response, minimum fuel consumption, moderate torque — ideal for town driving and long journeys.
  • STOCK Map: factory calibration, useful for the MOT or dealer inspections.
  • SPORT Map: full Stage 1, maximum response and torque.
  • Circuit/Race Map (optional 4th map): Stage 2 with Pop & Bangs, Launch Control and HardCut, intended for closed circuit use.
  • Towing Map (alternative): progressive response and thermal management adapted to sustained load.

How to switch maps

With an accelerator pedal sequence, with the ignition on and the engine off. No buttons or wiring need to be installed: the switch is made from the pedal itself. With the file, we give the workshop the exact sequence so it can explain it to the customer.

What the calibration covers

  • Implementation of 2, 3 or 4 complete profiles in the ECU flash.
  • Accelerator pedal sequence detection logic.
  • Switching routine with persistence between start-ups.
  • Map change signalled to the driver (how depends on the vehicle).
  • Compatibility with other modifications already in the file.
  • Recalculation of the checksum of the ECU.

ECU compatibility

Manufacturer Supported ECU families
Bosch EDC17 (C41, C46, C50, C54, C64, C70, C79, CP01-CP74), MED17, MD1, MG1
Bosch EDC15V, EDC15P, EDC15C
Continental / Siemens Simos PCR2.1, Simos 8/10/12/18, SID201-208
Delphi DCM6.2AP, DCM7.1, MT86
Marelli MJD8F3, 8GSF, 8GMF

Typical applications

  • Mixed road + track use: Stage 1 smooth for everyday use, Stage 2 + Pop&Bangs for track day.
  • Taxi and ride-hailing fleets: economy map during working hours, standard map outside them.
  • Stage 3 builds with a stock map: so the vehicle passes the MOT in stock mode and is then switched to Stage 3.
  • Shared vehicles (couple, family): each driver gets their own map.
  • 4x4 / off-road vehicles: soft traction map off-road, standard map on the road.

If the goal is to apply Stage 1 on a single map, see Stage 1 remapping. For combined track builds, see Pop & Bangs and Launch Control.

Technical process

  1. The workshop sends us the original vehicle file.
  2. We agree with the workshop how many maps there will be and what each one contains.
  3. We implement the profiles and the switching logic in the flash.
  4. We validate the checksum and return the file ready to flash.
  5. We show the workshop the map-switching sequence so it can explain it to the end customer.

Professional notice: This service is aimed at workshops and professionals in the automotive sector. It is suitable for off-road applications, agricultural and industrial machinery, racing vehicles, repair of cloned or replaced ECUs, and cases of failure where the original hardware is no longer viable. The final application to the vehicle and its subsequent use are the sole responsibility of the professional installer and the end user, in accordance with the applicable legislation in each country.

Frequently asked questions

Can it be combined with Stage 1 or Stage 2?

Yes — in fact it is the most common use. One map is stock, another Stage 1 and the third Stage 2. The driver chooses depending on the situation. It is a service usually ordered together with other modifications.

Is there a risk of losing the selected map at start-up?

No. The selected map is stored in non-volatile memory and persists between start-ups. At the next ignition the vehicle loads the last map used. This is built in specifically as part of the service.

What if the workshop doesn't know which ECU the vehicle has?

Send us the extracted file and we'll identify it. We'll confirm whether that ECU supports multi-map and how many maps fit.

How does the driver know the map has changed?

The system confirms every map change to the driver. The exact way it is signalled depends on each vehicle and on what its ECU allows; we tell you along with the sequence when we deliver the file.

Do you need this service for a customer's vehicle?

Register as a professional at EcuTracer and access our B2B platform: turnaround depending on the ECU, confirmed before we start, direct technical support via WhatsApp and a tailored quote.