In-house development · New · October 2026

Fixing files from other tuners: a clean Stage from the original

When a file made by another tuner throws faults or underperforms, we do not patch it: we go back to the original and do the work again. Two real cases on Bosch MED17.5.25 and MED17.1.

Our approach

We get vehicles with a file from another tuner that turns on the warning light, goes into limp mode or does not deliver what it should. We do not work on third-party files: we always start from the original calibration, the vehicle's own or one with the same software version, and do the work from the beginning. That way we know exactly what has been modified and the result is consistent with the rest of the calibration.

Case 1: VW Caddy 1.6 MPI with Bosch MED17.5.25

Third-party Stage 1 with code P1335 (torque monitoring). We recovered the original and made a clean Stage 1. Result: no fault and the full Stage 1 gain.

Case 2: Audi A4 B8 2.0 TFSI with Bosch MED17.1

Badly made third-party file. We went back to the original and, since the vehicle had hardware for more, made a custom Stage 3, calibrated remotely together with the workshop.

Requirements

  • Full read of the ECU as it is now.
  • The original file, if the workshop or the customer still has it; if not, we start from the original calibration for that software version.
  • Fault codes and symptoms.
  • Vehicle logs, for custom work.

Price

On request. A clean Stage from the original is quoted as that vehicle's Stage; Stage 3 and other custom work, as custom development.

Frequently asked questions

What problems do you fix?

Faults that appear after a remap: limp mode, hesitation, the warning light on, or performance below what is expected.

What do I need to send?

The ECU read with the modified file, the original if it has been kept, the fault codes and the symptoms. For custom work, vehicle logs as well.

Do you need the stock original?

If it has been kept, better. If not, we confirm before we start whether we can work from the original calibration for that software version.

Do you work on the other tuner's file?

No. We always start from the original calibration and do the work again.

What is the delivery time?

It depends on the ECU and the job; we confirm it before we start. Stage 3 and custom work are scheduled with the workshop.

Got an ECU with no commercial solution?

Send us the full read and the software reference. We will tell you whether we can develop it, and how long it will take, before we start.